|Hardware Problems | Software Problems|
Noisy Fan In PC
Problem: PC starts making a strange noise.
Hardware: Fan (power supply, video card and on the CPU).
Resolution Steps: I get this problem fairly frequently from friends and clients: "Hello? My computer is making a strange noise. Can you come and fix it please?"
Strange noises coming from the computer are usually caused either by a fan or the hard drive (this isn't too surprising really, these are the two most mechanical parts in the box!). Another possible cause is the CD-ROM drive (either a CD rattling on the tray or the whole tray rattling loose), but this is far rarer.
The first step is to find out which device is making the noise. Remove the computer case's cover and listen carefully. You should be able to pinpoint where the noise is coming from (unless it's one of those intermittent faults that always seem to disappear when the technician arrives to fix the problem!). Because you're working inside the PC you might want to wear an anti-static strap for protection against static electricity.
If the noise appears to be coming from the hard drive then you can confirm this by turning off the PC, unplugging the power plug from the hard drive and restarting the PC. If the noise isn't heard then you can be pretty sure that the hard drive is the culprit. There's not much you can do about a noisy hard drive, often it's a sign that the hard drive is on its way out and you should replace it immediately while you can still retrieve data from it.
If the noise appears to be coming from the fan over the CPU then you can confirm this by carefully sticking a paper clip or small screw driver into the fan's blades and seeing if the noise stops (this sounds rather drastic but it will tell you straight away if it's the fan or not). Don't stop the fan for too long, a second or two is all it takes to see if the noise stops. Use the same method for checking the fan on your video card.
It's usually fairly simple to see if the noise is coming from the fan in the power supply as it's easy to get your ear close to this fan.
Now that you know it's a fan problem you have to decide if you want to replace the fan or try to repair it. If the PC is still under warranty then go for the replacement option (after all, it won't cost you anything and you did pay for that warranty). If the faulty fan is on a slot-type CPU (i.e. the CPU and fan are built into a thick board that sticks up from the motherboard) then I'd opt for replacement. If the problem fan is in the power supply and you're not confident with electrical safety issues then opt for getting it repaired or replaced professionally. If you want to try repairing the fan yourself then read on...
If the CPU is a socket type then remove the fan. Removal is usually accomplished by either unclipping a metal clip or two or by unscrewing four screws. Sometimes the fan and heatsink are one unit, other times they are separate (in which case leave the heatsink on the CPU and remove just the fan). Before removing the fan take a note of the sticker on it so that you can replace the fan the right way up.
If it's a slot-type CPU then you will have to remove the whole CPU board (look for a plastic clip at each end of the board).
If it's the power supply fan that is causing the problem then carefully remove the PSU box (this is usually achieved by removing four screws from the back of the case that attach the PSU to the case). Depending on the style of case and the length of the power cables you might be able to lift the PSU box up and rest it on the case, or you may have to disconnect some or all of the power cables in order to be able to lift the PSU box out. Remove a couple more screws and you should find the PSU box comes apart. Take a note of which way round the fan is so you can replace it correctly and remove the four screws holding the fan in place and lift the fan out (you may have to unplug it first).
We're going to add a little lubricant to the fan so make sure you've got some handy, I recommend FanLube as being specially designed for PC fans. Don't use general purpose oil or lubricant (i.e. sewing machine oil, WD-40, etc). The next job is to locate where to put the lubricant. You will usually see a sticker in the centre of the fan. Carefully lift the sticker up. If you see solid plastic in the centre of the fan then try the other side of the fan. In the centre of the fan you might see either a hole with a spindle in it, or a small rubber cap that you can prise off to reveal the hole and spindle.
Put a drop of lubricant in the hole and spin the fan around a few times to work the lubricant in. If there was a rubber cap then replace it. Put the fan back (you did take a note of which way up the fan was before you removed it, didn't you?) Usually fans blow down onto the heatsink and CPU, so it's important you replace the fan the correct way up.
For lots of info about fans and keeping your system cool check out these sites:
Recommended Reading: Upgrading and Repairing PCs: The best PC hardware resource anywhere!
Comments From People Who Had This Problem:
Name: Stuart Rosen
Send Feedback to Murray
Copyright © 2001-2017 Murray Moffatt
Did you find my site useful? You can show your thanks
by making your next Amazon purchase through this website.
It won't cost you any extra and Amazon will pay me a small commission.